Skip to Main Navigation | Skip to Content



School of Technology

Grinstead Building, Room 009
Warrensburg, MO 64093
Phone: 660-543-4436
Fax: 660-543-4578
Email: Dr. Ronnie Rollins



School of Technology Minors

There are eight minors available:

Automotive Technology Minor

These are the required courses for the Automotive Technology  Minor for a Bachelor's Degree at the University of Central Missouri. Current or prospective UCM students should contact the program coordinator for further information or guidance.

Minor requirements:  27
ATM 1010 Contemporary Power Systems 3
ET 1010 Applied Electricity 4
ATM 2110 Eng. Theory & Maintenance 4
ATM 2124 Automotive Braking Systems 4
ATM 2130 Auto. Electrical Systems 4
ATM 2132 Engine Performance I 4
ATM 3120 Steering & Susp. Systems 4

Automotive Technology minor for a bachelor's degree 27 hours.

UCM does not confer teacher certification for this minor.
See the current catalog for a complete statement of academic policies, leveling, and prerequisites.

Automotive Technology Minor
Program Coordinator: Dr. Scott Wilson
Campus: 660-543-4065
Fax: 660-543-4431
Email: swilson@ucmo.edu

Construction Management Minor

These are the required courses for the Construction Management  Minor for a Bachelor's Degree at the University of Central Missouri. Current or prospective UCM students should contact the program coordinator for further information or guidance.

Course of Study

Minor Requirements    21
CMGT 1300 Introduction to Construction Mgt. 3
CMGT 2310 Construction Plans & Spec. 3
CMGT 3320 Principles of Construction Mgt. 3
CMGT 3355 Construction Planning & Sched. 3
CMGT 2325 Project Cost Estimating 3
Electives from the following: 9
*CMGT 2340 Surveying & Const. Layout 3
CMGT 3010 Applied Construction Practices 3
CMGT 3330 Bldg. Codes & Code Admin. 3
CMGT 4310 Construction Safety 3
CMGT 4325 Adv. Estimating & Cost Analysis 3
CMGT 4355 Computer-Based Project Control 3

*Has prerequisite of MATH 1112 not included in the minor program.

Please contact the Program Coordinator if you have questions regarding this minor.

Construction Management Minor
Program Coordinator: Dr. Kyle Larson
Phone: 660 543-8214
Fax: 660 543-4431

Email:  klarson@ucmo.edu

CADD Minor

These are the required courses for the CADD Minor for a Bachelor's Degree at the University of Central Missouri. Current or prospective UCM students should contact the program coordinator for further information or guidance.

Minor requirements: 21
Must contain at least 9 credit hours not taken in your major  
CADD 1105 Basic AutoCAD 1
CADD 1110 Fundamentals of Drafting 3
CADD 1170 Introduction to Camputer-Aided Drafting 2
CADD 2140 Computer-Aided Drafting & Design for Engineering Technology 3
CADD 2160 Structural Drafting 3
**Department approved electives in CADD  9

CADD Minor* for a bachelor's degree 21 hours

UCM does not confer teacher certification for this minor.

* See the current catalog for a complete statement of academic policies, leveling, and prerequisites.

** Electives must have a CADD prefix.

CADD Minor
Program Coordinator: Roya Azimzadeh
Office: G009, UCM
Warrensburg, MO 64093
Phone: 660-543-4439
Email: azimzadeh@ucmo.edu

Electronics Technology Minor

These are the required courses for the Electronics Technology  Minor for a Bachelor's Degree at the University of Central Missouri. Current or prospective UCM students should contact the program coordinator for further information or guidance.

Minor requirements:  
Area 1  
ET       1026 DC Circuit Analysis 4
ET       1027 AC Circuit Analysis 3
ET       1050 Digital Principles & Applications  4
ET       2048 Active Electronic Devices 4
MATH 1112 College Trigonometry, 2 or  
INDT   1042 Technical Mathematics, 3 2-3
Upper-level electives in electronics technology 4
Area 2  
NET    1060 Introduction to Networking 3
NET    1061 Routers & Router Basics 3
NET    2060 Switching Basics & Intermediate Routing 3
NET    2061 WAN Technologies 3
NET    4060 Advanced Network Routing 3
NET    4061 Remote Access 3
NET    4062 Advance Switching 3
NET    4063 Network Support  3

Electronics Technology minor for a bachelor's degree 21-24 hours

UCM does not confer teacher certification for this minor.
See the current catalog for a complete statement of academic policies, leveling, and prerequisites.

Electronics Technology Minor
Program Coordinator: Dr. Ronnie Rollins
Campus: 660-543-4439
Fax: 660-543-4578
Email: Dr. Ronnie Rollins

Fashion Merchandising Minor

These are the required courses for the Fashion Merchandising Minor for a Bachelor's Degree at the University of Central Missouri. Current or prospective UCM students should contact the program coordinators for further information or guidance.

Course of Study

Minor Requirements 21
FAME 1400 Principles of Fashion Merchandising 3
FAME 2442 Textile Science 3
FAME 3430 Professional Image Management 3
**Department approved electives 12

** Electives must have a FAME prefix.

UCM does not confer teacher certification for this minor.
See the current catalog for a complete statement of academic policies, leveling, and prerequisites.

Program Coordinator: Dr. Lynn Alkire
Campus: 660-543-4202
Fax: 660-543-4578
Email: alkire@ucmo.edu

Graphic Technologies Minor

These are the required courses for the Graphics Minor for a Bachelor's Degree at the University of Central Missouri. Current or prospective UCM students should contact the program coordinator for further information or guidance.

Minor requirements: 20
Electives from the following:   6-7
GRAP 1010 Fundamentals of Printing Processes 3
CADD 1110 Fundamentals of Drafting 2
PHOT 1210 Foundations of Professional Photography 3
PHOT 1211 Foundations Technique & Critique 1
**Department approved electives in Graphics  13-14

Graphics Minor* for a bachelor's degree 20 hours

Central does not confer teacher certification for this minor.

* See the current catalog for a complete statement of academic policies, leveling, and prerequisites.

** Electives must have a GRAP, CADD, or PHOT prefix.

Graphics Minor
Program Coordinator: Dr. Ronnie Rollins
Office: G009, UCM
Warrensburg, MO 64093
Phone: 660-543-4439
Email: Dr. Ronnie Rollins

Manufacturing Minor for a Bachelor's Degree

Students seeking a bachelor of science degree may chose the Manufacturing Minor which prepares them for supervisory careers in the manufacturing sector of industry.  This option combines the following:  advanced manufacturing, numerical control, production processes, material sciences, machine tool technology, and computer-aided drafting.  Graduates with this minor seek a variety of positions as manufacturing managers and production supervisors in industry.

Minor Requirements 22
ENGT 2040 Engineering Material Science 4
ENGT 2530 Machine Tool Technology 3
ENGT 3562 Computer Numerical Control 3
Electives from the following: 12
ENGT 1510 Intro. to Mfg. Processes 3
ENGT 2515 Applied Manufacturing Processes 3
ENGT 4590 Computer Integrated Manuf. 3
ENGT 4520 Robotics and Automotation 3
ENGT 3530 Inspection and Quality Control 3
CADD 1105 Basic AutoCAD 1
CADD 1110 Fundamentals of Drafting 2
CADD 2170 Intro. to Computer-Aided Drafting 2

UCM does not confer teacher certification for this minor.
Please contact the Program Coordinator if you have questions regarding this minor.

Manufacturing Technology Minor
Program Coordinator: Dr. Jeff Ulmer
Phone: 660 543-8337
Fax: 660 543-4578

Email:  julmer@ucmo.edu

Photography Minor

These are the required courses for the Photography Minor for a Bachelor's Degree at University of Central Missouri. Current or prospective UCM students should contact the program coordinator for further information or guidance.

Minor requirements*: 20-21
PHOT 1210 Foundations of Prof. Photography 3
PHOT 1211 Image Critique 1
PHOT 2210 Studio Photography 3
PHOT 2250 Portrait Photography 3
**Electives in photography 10-11

Photography Minor for a bachelor's degree* 20-21 hours

Central does not confer teacher certification for this minor.
Must include at least one upper-level (3000/4000) course to meet graduation requirements.

* See the current catalog for a complete statement of academic policies, leveling, and prerequisites.

** Electives must have a PHOT prefix.

Program Coordinator: Tom Mitchell
Campus: 660-543-8914
Fax: 660-543-4578
Email: mitchell@ucmo.edu